Products

Terluran GP-35

Terluran® GP-35 is high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio.

Key Features

  • Excellent colorability
  • High flowability
  • Good impact resistance
  • Good heat distortion resistance
  • High quality surface finish and gloss
  • Great mechanical strength and rigidity

Applications

  • Injection molding
  • Thin wall components for telecommunications
  • Household and sanitary appliances
  • Toys
  • Automotive components
  • Electroplating
  • Grade Version
  • Properties

    Properties of Terluran GP-35

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 3,1
    Melt Flow Rate, 220 °C/10 kg ASTM D 1238 g/10 min 34
    Melt Volume Rate 230 °C/3.8 kg ASTM D 1238 cm³/10 min 11
    Mechanical Properties
    Izod Notched Impact Strength, 23 °C (73 °F) ASTM D 256 ft-lb/in 4,5
    Izod Notched Impact Strength, -18 °C (0 °F) ASTM D 256 ft-lb/in 1,6
    Izod Notched Impact Strength, -30 °C (-22 °F) ASTM D 256 ft-lb/in 1,5
    Tensile Stress at Yield, 23 °C ASTM D 638 psi 6520
    Tensile Modulus ASTM D 638 psi x 10³ 362
    Elongation, Failure ASTM D 638 % 2,4
    Flexural Strength, 23 °C ASTM D 790 psi 9430
    Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 341
    Hardness, Rockwell ASTM D 785 R scale 102
    Thermal Properties
    Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °F 203
    DTUL @ 264 psi - Unannealed ASTM D 648 °F 167
    DTUL @ 66 psi - Unannealed ASTM D 648 °F 192
    DTUL @ 264 psi - Annealed ASTM D 648 °F 206
    DTUL @ 66 psi - Annealed ASTM D 648 °F 213
    Electrical Properties
    Dielectric Constant at 106 CPS (1000000 Hz, 0,0394 in) ASTM D 150 - 2,8
    Volume Resistivity ASTM D 257 - >1013
    Other Properties
    Density ASTM D 792 lb/in³ 1,04
    Water Absorption, Saturated at 23 °C ASTM D 570 % 0,95
    Processing
    Linear Mold Shrinkage ASTM D 955 in/in 0 - 0,01
    Melt Temperature Range - °F 425 - 500
    Mold Temperature Range - °F 85 - 140
    Injection Velocity - in/s 8
    Drying Temperature - °F 175

    Typical values for uncolored products

  • Processing

    Processing of Terluran GP-35

  • Safety Data Sheet