Products

Luran S 776SE

Luran® S 776SE is suitable extrusion applications. It provides good impact toughness and enables matte surface appearance for extruded sheets.

Key Features

  • Good impact strength
  • Suitable for extrusion
  • Enables matte surface finish in extrusion

Applications

  • Sheets
  • Gardening equipment
  • Grade Version
  • Properties

    Properties of Luran S 776SE

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Flow Rate, 220 °C/10 kg ASTM D 1238 g/10 min 4
    Mechanical Properties
    Izod Notched Impact Strength, 23 °C (73 °F) ASTM D 256 ft-lb/in 4,9
    Izod Notched Impact Strength, -40 °C (-40 °F) ASTM D 256 ft-lb/in 1
    Tensile Stress at Yield, 23 °C ASTM D 638 psi 4780
    Tensile Modulus ASTM D 638 psi x 10³ 239
    Elongation, Failure ASTM D 638 % 2,7
    Flexural Strength, 23 °C ASTM D 790 psi 6810
    Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 241
    Hardness, Rockwell ASTM D 785 R scale 89
    Hardness, Shore D ASTM D 2240 - 60
    Thermal Properties
    Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °F 197
    DTUL @ 264 psi - Annealed ASTM D 648 °F 181
    DTUL @ 66 psi - Annealed ASTM D 648 °F 213
    Electrical Properties
    Dielectric Constant at 106 CPS (1000000 Hz, 0,0394 in) ASTM D 150 - 3,4
    Volume Resistivity ASTM D 257 - >1012
    Surface Resistivity ASTM D 257 - >1013
    Optical Properties
    Specular Gloss, 60 ° ASTM D 523 48
    Light Transmission at 550 nm ASTM D 1003 % 90
    Other Properties
    Density ASTM D 792 lb/in³ 1,07
    Water Absorption, Saturated at 23 °C ASTM D 570 % 1,65
    Processing
    Linear Mold Shrinkage ASTM D 955 in/in 0,0055
    Drying Temperature - °F 176
    Suggested Max. Regrind - % 30

    Typical values for uncolored products

  • Processing

    Processing of Luran S 776SE

  • Safety Data Sheet