K-Resin DK11
K-Resin® DK11 is easily processed on injection molding specificially for medical devices. K-Resin® DK11 has good thermal stability and broader processing window.
Key Features
- Excellent Clarity
- Good Toughness
- High Surface Gloss
- Good Stiffness
- Good Heat Sealability
- High Gas Permeability
Applications
- Controlled Atmosphere Packaging
- Cover Films for IC carrier tape
- Medical Packaging
- Decorative Films
- Lidstock and Labeling Film
- Twist Wrap
Industries
-
Grade Version
-
Properties
특성
섭씨 23도에서 변색되지 않는 제품에 대한 일반적인 값 테스트 방법 단위 값 유동적 특성 Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 7.5 기계적 특성 Elongation at Break (MD) ASTM D 882 % 110 Elongation at Break (TD) ASTM D 882 % 200 Elemendorf Tear (MD) ASTM D 1922 lbs 0.02 Elemendorf Tear (TD) ASTM D 1922 lbs 0.0033 Puncture, Energy at Peak Force ASTM D 3763 in-lb 8 Tensile Yield Strength (MD) ASTM D 882 psi 5000 Tensile Yield Strength (TD) ASTM D 882 psi 3100 Secant Modulus, 1% MD ASTM D 882 psi 205000 Secant Modulus, 1% TD ASTM D 882 psi 140000 Dart Drop, 26 in (66 mm) ASTM D1709 g 590 Flexural Strength, 23 °C ASTM D 790 psi 5400 Tensile Strain at Break, 23 °C ASTM D 638 % 230 Tensile Modulus ASTM D 638 psi x 10³ 220 Nominal Strain at Break, 23 °C - % 170 열 특성 Vicat Softening Temperature, B/1 ( 120 °C/h, 10N) ASTM D 1525 °F 185 기타 특성 Gardner Gloss (mold temperature 100°F) ASTM D2457 % 140 Haze ASTM D 1003 % 1 Light Transmission at 550 nm ASTM D 1003 % 92 처리 중 Density (ASTM ) ASTM D 792 g/cm³ 1.01 Oxygen Transmission Rate (23 °C/0% RH) ASTM D 3985 cc/100in²/day 420 Water Vapor Transmission Rate (WVTR) (23 °C/0% to 85% RH gradient) ASTM F1249-06 g/100in²/day 5.5 The nominal properties herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes. Values are rounded.
Typical blown film properties with 3% SKR17 slip/antiblock, I mil ( 0.025 mm) film (2.5:1 BUR) 35 mil ( 0.90 mm) die gap.
[Vicat Softening Point] = Injection Molded Specimen.
[Haze] = Haze was me asured using blown film containing only 1% SKR19 stabilizer, I mil ( 0.025 mm) film (2.5:1 BUR) 35 mil ( 0.90 mm) die gap. -
Processing
처리 중
-
Safety Data Sheet