제품

K-Resin KR05

K-Resin® KR05 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin® SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. INEOS Styrolution has several grades of K-Resin® SBC tailored for your sheet extrusion needs. K-Resin® KR05 will process on most conventional equipment, allowing the molder to run a crystal clear bottle without expensive machine modifications, special molds, different screws, or dryers. K-Resin® SBC are blow molded in a broad range of sizes and shapes, from small pill bottles and medical drainage units, to very tall display bottles. They can also be injection blow molded into extremely high impact bottles with glass-like clarity.

Key Features

  • Excellent Clarity
  • Good Stiffness
  • Good Formability
  • Good Toughness
  • High Surface Gloss

Applications

  • Bottles
  • Molded Boxes and Containers
  • Medical Devices
  • Portion Packages
  • Blister Packaging

Industries

  • Grade Version
  • Properties

    특성

    섭씨 23도에서 변색되지 않는 제품에 대한 일반적인 값 테스트 방법 단위
    유동적 특성
    Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 7.5
    기계적 특성
    Instrumented Dart Impact (total energy) ASTM D 3763 in-lbs 354
    Tensile Stress at Yield, 23 °C ASTM D 638 psi 3800
    Tensile Strain at Break, 23 °C ASTM D 638 % 230
    Flexural Strength, 23 °C ASTM D 790 psi 5400
    Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 260350
    Hardness, Shore D ASTM D 2240 - 63
    열 특성
    Vicat Softening Temperature, B/1 ( 120 °C/h, 10N) ASTM D 1525 °F 185
    DTUL @ 264 psi - Annealed ASTM D 648 °F 144
    기타 특성
    Light Transmission at 550 nm ASTM D 1003 % 92
    Gardner Gloss (mold temperature 100°F) ASTM D2457 % 162
    처리 중
    Density ASTM D 792 lb/in³ 1.01
    Moisture Absorption ASTM D570 % 0.09

    The nominal properties herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes. Values are rounded.
    The nominal properties herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes. Values are rounded.\n(Tensile Yield Strength/Tensile Elongation @ Break) = Type 1 @ 2 in/min (

  • Processing

    처리 중

  • Safety Data Sheet