NAS® XC
NAS® XC is a styrene methyl methacrylate copolymer that can be used in a variety of applications demanding a low haze and extreme clarity.
Key Features
- High surface quality
- Transparency
- Low density
- Water clear appearance
Applications
- Automotive rear light housings
-
Grade Version
-
Properties
属性
无色产品在摄氏 23 度时的典型值 测试方法 单位 数值 流变性能 Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 2 机械性能 Izod Notched Impact Strength, 23 °C (73 °F) ASTM D 256 ft-lb/in 0.4 Tensile Stress at Yield, 23 °C ASTM D 638 psi 9500 Tensile Modulus ASTM D 638 psi x 10³ 490 Elongation, Failure ASTM D 638 % 4 Flexural Strength, 23 °C ASTM D 790 psi 15800 Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 480 Hardness, Rockwell ASTM D 785 M scale 71 热性能 Vicat Softening Temperature, B/1 ( 120 °C/h, 10N) ASTM D 1525 °F 227 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) - °F 210 Glass transition temperature - - 218 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °F 218 其他属性 Refractive Index, Sodium D Line ASTM D 542 - 1.54 Light Transmission at 550 nm ASTM D 1003 % 93 Haze ASTM D 1003 % 0.3 Other Properties Water Absorption, Saturated at 23 °C ASTM D 570 % 0.17 Density (ASTM ) ASTM D 792 g/cm³ 1.11 Processing Linear Mold Shrinkage ASTM D 955 in/in 0.002 - 0.006 Melt Temperature Range - °F 410 - 470 Mold Temperature Range - °F 90 - 140 Rear Temperature Range - °F 360 - 420 Middle Temperature Range - °F 390 - 450 Front Temperature Range - °F 410 - 470 Drying Temperature - °F 180 Drying Time - h 2 Max Service Temperature - °F 500 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
处理
-
Safety Data Sheet