产品

Novodur Ultra 4000PG

Novodur® Ultra 4000PG is an injection molding grade especially suitable for electroplating, providing enhanced heat resistance.

Key Features

  • Electroplating grade
  • High heat resistance

Applications

  • Automotive exterior
  • Radiator grills
  • Rollover bar covers

Industries

  • Grade Version
  • Properties

    属性

    无色产品在摄氏 23 度时的典型值 测试方法 单位 数值
    流变性能
    Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 7
    机械性能
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 23
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 10
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 23
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 10
    Tensile Stress at Yield, 23 °C ISO 527 MPa 46
    Tensile Strain at Yield, 23 °C ISO 527 % 3.1
    Tensile Modulus ISO 527 MPa 2400
    Flexural Strength, 23 °C ISO 178 MPa 73
    Flexural Modulus, 23 °C ISO 178 MPa 2350
    Hardness, Ball Indentation ISO 2039-1 MPa 110
    Tensile Strain at Break, 23 °C ISO 527 % > 15
    热性能
    Vicat Softening Temperature, VST/A/120 (10N, 120 °C/h) ISO 306 °C 111
    Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 109
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 107
    Vicat Softening Temperature, VST/A/50 (10N, 50 °C/h) ISO 306 °C 115
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 103
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 98
    Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 90
    电气性能
    Dissipation Factor (100 Hz) IEC 62631-2-1 10-4 65
    Dissipation Factor (1 MHz) IEC 62631-2-1 10-4 85
    Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 38
    Relative Permittivity (100 Hz) IEC 62631-2-1 - 3
    Relative Permittivity (1 MHz) IEC 62631-2-1 - 2.9
    Volume Resistivity IEC 62631-3-1 Ω*m 1014
    Surface Resistivity IEC 62631-3-1 Ω 1016
    Comparative Tracking Index IEC 60112 V 600
    Other Properties
    Density ISO 1183 kg/m³ 1050
    UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0.5 - 0.8
    Melt Temperature Range ISO 294 °C 230 - 260
    Mold Temperature Range ISO 294 °C 60 - 80
    Injection Velocity ISO 294 mm/s 240
    Drying Temperature - °C 80
    Drying Time - h 2 - 4

    Typical values for uncolored products

  • Processing

    处理

  • Safety Data Sheet