製品

Novodur P2M-AT

Novodur® P2M-AT is a medium impact, high gloss injection molding grade with good flowability and contains an antistatic additive.

Key Features

  • Medium impact
  • High gloss

Applications

  • Houshold appliances
  • Telecommunication
  • Grade Version
  • Properties

    物性

    23℃での無色製品の標準値 試験方法 単位 数値
    流動学的性質
    Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 20
    機械的性質
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 22
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 11
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 22
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 11
    Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 180
    Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 120
    Tensile Stress at Yield, 23 °C ISO 527 MPa 39
    Tensile Strain at Yield, 23 °C ISO 527 % 2.1
    Tensile Modulus ISO 527 MPa 2300
    Flexural Strength, 23 °C ISO 178 MPa 60
    Flexural Modulus, 23 °C ISO 178 MPa 2100
    Hardness, Ball Indentation ISO 2039-1 MPa 97
    熱的性質
    Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 100
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 98
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 93
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 97
    Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 100
    電気的性質
    Dissipation Factor (100 Hz) IEC 62631-2-1 10-4 60
    Dissipation Factor (1 MHz) IEC 62631-2-1 10-4 80
    Relative Permittivity (100 Hz) IEC 62631-2-1 - 3.1
    Relative Permittivity (1 MHz) IEC 62631-2-1 - 3
    Comparative Tracking Index IEC 60112 V 600
    Volume Resistivity IEC 62631-3-1 Ω*m >1013
    Surface Resistivity IEC 62631-3-1 Ω >1015
    Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 322
    進行中
    Density ISO 1183 kg/m³ 1040
    UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7
    Melt Temperature Range ISO 294 °C 230 - 260
    Mold Temperature Range ISO 294 °C 60 - 80
    Injection Velocity ISO 294 mm/s 240
    Drying Temperature - °C 80
    Drying Time - h 2 - 4

    Typical values for uncolored products

  • Processing

    進行中

  • Safety Data Sheet