Home ProductsABSNovodur® High HeatNovodur H802

Products

Choose Region:

Americas

Novodur H802

Novodur® acrylonitrile butadiene styrene (ABS) polymers feature high surface quality and good impact strength. Novodur® H802 is a high heat injection molding grade with high stiffness and excelelnt gloss. It is especially suitable for being painted.

Key Features

  • Heat resistance
  • High gloss
  • Good paintability

Applications

  • Automotive exterior trim : mirror housings, exterior pillars & trims, spoilers
  • Automotive rear light housings
  • Housings for electrical & electronic devices

Industries

  • Grade Version
  • Properties

    Properties of Novodur H802

    Property, Test Condition Standard Unit Values
    Rheological Properties
    Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 9.5
    Mechanical Properties
    Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 18
    Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 8
    Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 100
    Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 80
    Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 18
    Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 8
    Tensile Modulus ISO 527 MPa 2700
    Tensile Stress at Yield, 23 °C ISO 527 MPa 51
    Tensile Strain at Yield, 23 °C ISO 527 % 2.8
    Tensile Stress at Break, 23 °C ISO 527 MPa 37
    Tensile Strain at Break, 23 °C ISO 527 % > 15
    Nominal Strain at Break, 23 °C ISO 527 % 25
    Flexural Modulus, 23 °C ISO 178 MPa 2700
    Flexural Strength, 23 °C ISO 178 MPa 80
    Hardness, Ball Indentation ISO 2039-1 MPa 115
    Thermal Properties
    Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 110
    Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 108
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 101
    Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 107
    Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 80
    Electrical Properties
    Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 34
    Comparative Tracking Index IEC 60112 V 600
    Other Properties
    Density ISO 1183 kg/m³ 1050
    UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB
    Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700
    Processing
    Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7
    Melt Temperature Range ISO 294 °C 230 - 260
    Mold Temperature Range ISO 294 °C 60 - 80
    Drying Temperature - °C 80
    Drying Time - h 2 - 4

    Typical values for uncolored products
    Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
    Please consult our local sales or technical representatives for details.

  • Processing

    Processing of Novodur H802

  • Safety Data Sheet
    Download Safety Data Sheet