Novodur H802
Novodur® acrylonitrile butadiene styrene (ABS) polymers feature high surface quality and good impact strength. Novodur® H802 is a high heat injection molding grade with high stiffness and excelelnt gloss. It is especially suitable for being painted.
Key Features
- Heat resistance
- High gloss
- Good paintability
Applications
- Automotive exterior trim : mirror housings, exterior pillars & trims, spoilers
- Automotive rear light housings
- Housings for electrical & electronic devices
Industries
-
Grade Version
Please Sign in or Register with INEOS Styrolution to download REACH and other Regulatory Documents
New to INEOS Styrolution? Registration
-
Properties
Properties of Novodur H802
Property, Test Condition Standard Unit Values Rheological Properties Melt Volume Rate 220 °C/10 kg ISO 1133 cm³/10 min 9.5 Mechanical Properties Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 18 Izod Notched Impact Strength, -30 °C ISO 180/A kJ/m² 8 Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² 100 Charpy Unnotched, -30 °C ISO 179/1eU kJ/m² 80 Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 18 Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 8 Tensile Modulus ISO 527 MPa 2700 Tensile Stress at Yield, 23 °C ISO 527 MPa 51 Tensile Strain at Yield, 23 °C ISO 527 % 2.8 Tensile Stress at Break, 23 °C ISO 527 MPa 37 Tensile Strain at Break, 23 °C ISO 527 % > 15 Nominal Strain at Break, 23 °C ISO 527 % 25 Flexural Modulus, 23 °C ISO 178 MPa 2700 Flexural Strength, 23 °C ISO 178 MPa 80 Hardness, Ball Indentation ISO 2039-1 MPa 115 Thermal Properties Vicat Softening Temperature, VST/B/120 (50N, 120 °C/h) ISO 306 °C 110 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 108 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 101 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 107 Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 80 Electrical Properties Dielectric Strength, Short Time, 1.0 mm IEC 60243-1 kV/mm 34 Comparative Tracking Index IEC 60112 V 600 Other Properties Density ISO 1183 kg/m³ 1050 UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 700 Processing Linear Mold Shrinkage ISO 294-4 % 0.4 - 0.7 Melt Temperature Range ISO 294 °C 230 - 260 Mold Temperature Range ISO 294 °C 60 - 80 Drying Temperature - °C 80 Drying Time - h 2 - 4 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
Processing of Novodur H802
-
Safety Data Sheet