K-Resin DK11
K-Resin® DK11 is easily processed on injection molding specificially for medical devices. K-Resin® DK11 has good thermal stability and broader processing window.
Key Features
- Excellent Clarity
- Good Toughness
- High Surface Gloss
- Good Stiffness
- Good Heat Sealability
- High Gas Permeability
Applications
- Controlled Atmosphere Packaging
- Cover Films for IC carrier tape
- Medical Packaging
- Decorative Films
- Lidstock and Labeling Film
- Twist Wrap
Industries
- Grade Version
-
Properties
属性
无色产品在摄氏 23 度时的典型值 测试方法 单位 数值 流变性能 Melt Volume Rate, 200 °C/5 kg ISO 1133 cm³/10 min 7.5 机械性能 Izod Notched Impact Strength, 23 °C ISO 180/A kJ/m² 3.5 Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 2 Charpy Unnotched, 23 °C ISO 179/1eU kJ/m² No Break Tensile Stress at Yield, 23 °C ISO 527 MPa 25 Tensile Strain at Break, 23 °C ISO 527 % 170 Tensile Modulus ISO 527 MPa 1500 Flexural Strength, 23 °C ISO 178 MPa 30 Flexural Modulus, 23 °C ISO 178 MPa 1400 Hardness, Shore D ISO 868 - 63 热性能 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 60 Vicat Softening Temperature, VST/A/120 (10N, 120 °C/h) ISO 306 °C 88 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 61 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 76 其他属性 Refractive Index, Sodium D Line ISO 489 - 1.57 Haze ASTM D 1003 % < 1.5 Light Transmission at 550 nm ASTM D 1003 % 91 Other Properties Density ISO 1183 kg/m³ 1010 Moisture Absorption, Equilibrium 23 °C/50% RH ISO 62 % 0.07 Processing Linear Mold Shrinkage ISO 294-4 % 0.3 - 1 Melt Temperature Range ISO 294 °C 180 - 240 Mold Temperature Range ISO 294 °C 30 - 50 The nominal properties herein are typical of the product but do not reflect normal testing variance and therefore should not be used for specification purposes. Values are rounded.
Typical blown film properties with 3% SKR17 slip/antiblock, I mil ( 0.025 mm) film (2.5:1 BUR) 35 mil ( 0.90 mm) die gap.
[Vicat Softening Point] = Injection Molded Specimen.
[Haze] = Haze was me asured using blown film containing only 1% SKR19 stabilizer, I mil ( 0.025 mm) film (2.5:1 BUR) 35 mil ( 0.90 mm) die gap. -
Processing
处理
-
Safety Data Sheet