LURAN S KR2863C
The product line Luran® SC, comprising blends of ASA with PC, shows in general high heat and high impact resistance and long-term property retention. Its UV resistance is not only sufficient for all kind of interior applications – incl. unpainted surfaces in light colors – but also for exterior parts with medium weatherability requirements. Luran® S KR2863C provides the highest heat performance among the Luran® SC grades and shows a very low residual profile for very sensitive interior applications in e.g. automotive applications.
Key Features
- High flowability
- Heat resistance
- Impact strength
- Color fastness
- Low emission
Applications
- Unpainted automotive interior: overhead consoles
- Automotive exterior trim : mirror housings, exterior pillars & trims, spoilers
- Housings for electrical & electronic devices
- Electrical and electronic components, switches, house automation
Industries
-
Grade Version
-
Properties
특성
섭씨 23도에서 변색되지 않는 제품에 대한 일반적인 값 테스트 방법 단위 값 유동적 특성 Melt Volume Rate, 260 °C/5 kg ISO 1133 cm³/10 min 20 기계적 특성 Charpy Notched Impact Strength, 23° C ISO 179/1eA kJ/m² 70 Charpy Notched Impact Strength, -30 °C ISO 179/1eA kJ/m² 17 Tensile Modulus ISO 527 MPa 2500 Tensile Stress at Yield, 23 °C ISO 527 MPa 62 Tensile Strain at Yield, 23 °C ISO 527 % 4.9 Tensile Stress at Break, 23 °C ISO 527 MPa 62 Tensile Strain at Break, 23 °C ISO 527 % > 50 Nominal Strain at Break, 23 °C ISO 527 % > 50 Flexural Modulus, 23 °C ISO 178 MPa 2500 Flexural Strength, 23 °C ISO 178 MPa 93 Hardness, Ball Indentation ISO 2039-1 MPa 110 열 특성 Vicat Softening Temperature VST/B/50 (50N, 50 °C/h) ISO 306 °C 130 Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) ISO 75 °C 109 Heat Deflection Temperature B; (annealed 4 h/80 °C; 0.45 MPa) ISO 75 °C 130 Coefficient of Linear Thermal Expansion ISO 11359 10-6/°C 70 - 90 Thermal Conductivity ISO 22007-4 W/(m K) 0.17 처리 중 Density ISO 1183 kg/m³ 1160 UL94 rating at 1.5 mm thickness IEC 60695-11-10 - HB Glow wire test (GWFI), 2.0 mm IEC 60695-2-12 °C 650 Water Absorption, Saturated at 23 °C ISO 62 % 0.6 Moisture Absorption, Equilibrium 23 °C/50% RH ISO 62 % 0.16 Processing Melt Temperature Range ISO 294 °C 260 - 300 Mold Temperature Range ISO 294 °C 60 - 90 Drying Temperature - °C 100 - 110 Drying Time - h 2 - 4 Linear Mold Shrinkage ISO 294-4 % 0.3 - 0.7 Typical values for uncolored products
Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
Please consult our local sales or technical representatives for details. -
Processing
처리 중
-
Safety Data Sheet