产品

Zylar 650

The product line Zylar® comprises blends from styrene, butadiene and methylmethacrylate copolymers (MBS). The blends are highly transparent, tough and show a good chemical resistance. Depending on the application, they can be a low density alternative for polycarbonate, PET-G or transparent ABS (MABS). The grades are suitable for medical applications, food contact statements are available upon request. Zylar®650 provides a good balance between transparency and toughness and is also available with UV package.

Key Features

  • Balanced properties
  • High flowability
  • Sterilisable(ETO,NO2,Irradiation)
  • Toughness
  • Low density

Applications

  • Household applications
  • Food contact applications
  • Medical devices
  • Medical diagnostic equipment
  • Toys, sports & leisure
  • Grade Version
  • Properties

    属性

    无色产品在摄氏 23 度时的典型值 测试方法 单位 数值
    流变性能
    Melt Flow Rate, 200 °C/5 kg ASTM D 1238 g/10 min 4
    机械性能
    Izod Notched Impact Strength, 23 °C (73 °F) ASTM D 256 ft-lb/in 3
    Impact Strength, Gardner ASTM D 5420 in-lbs 150
    Tensile Stress at Yield, 23 °C ASTM D 638 psi 3800
    Tensile Modulus ASTM D 638 psi x 10³ 310
    Elongation, Failure ASTM D 638 % 40
    Flexural Strength, 23 °C ASTM D 790 psi 7000
    Flexural Modulus, 23 °C ASTM D 790 psi x 10³ 280
    Hardness, Rockwell ASTM D 785 R scale 84
    热性能
    Vicat Softening Temperature, B/1 ( 120 °C/h, 10N) ASTM D 1525 °F 210
    Heat Deflection Temperature A; (annealed 4 h/80 °C; 1.8 MPa) - °F 197
    其他属性
    Refractive Index, Sodium D Line ASTM D 542 - 1.57
    Light Transmission at 550 nm ASTM D 1003 % 90
    Haze ASTM D 1003 % 1.8
    Other Properties
    Density (ASTM ) ASTM D 792 g/cm³ 1.05
    Water Absorption, Saturated at 23 °C ASTM D 570 % 0.1
    Processing
    Melt Temperature Range - °F 400 - 460
    Mold Temperature Range - °F 80 - 130
    Rear Temperature Range - °F 355 - 415
    Middle Temperature Range - °F 365 - 425
    Front Temperature Range - °F 375 - 435
    Drying Temperature - °F 150
    Drying Time - h 2
    Max Service Temperature - °F 480

    Typical values for uncolored products
    Please note that all processing data stated are only indicative and may vary depending on the individual processing complexities.
    Please consult our local sales or technical representatives for details.

  • Processing

    处理

  • Safety Data Sheet