Environmental compliance

Environmental Compliance

INEOS Styrolution Canada – PCIS Property Line Monitoring

INEOS Styrolution’s Sarnia site is registered to the Ontario Ministry of the Environment and Climate Change’s (MOECC) Technical Standards to Manage Air Pollution – Petrochemical Industry Standard (PCIS) under Ontario Regulation 419/05: Air Pollution – Local Air Quality. The intent of the PCIS is to identify and implement best available controls to minimize air emissions of benzene and 1, 3 butadiene from Ontario petrochemical facilities. INEOS Styrolution is registered to the PCIS to monitor benzene concentrations at the property fence line.

INEOS Styrolution recognizes the importance of minimizing emissions and is committed to transparency, open dialogue, and trust among stakeholders. Working collaboratively with the Sarnia Lambton Environmental Association (SLEA) and the MOECC on reduction of benzene emissions is an ongoing focus in this area. 

The data presented on this page are the results of continuous 14-day samples taken at locations around the property line of the INEOS Styrolution site. The monitoring locations and sampling methods used for the property line monitoring have been approved by the MOECC for the purposes of the PCIS. INEOS Styrolution will post the results of the 14-day samples to this website within 60 days of completion of each sampling event. 

O. Reg. 419/05 outlines half-hour and 24-hour standards for benzene and as such, the 14-day samples published here do not offer a direct comparison to these standards but will instead be assessed annually against an established baseline as directed under the PCIS. 

Property line concentrations can be affected by meteorological conditions such as wind direction and speed, ambient air temperatures, and proximity to on-site and off-site sources of benzene. To account for these potential sources of impact, the data collected will be utilized to establish a baseline concentration for each property line monitor over a 3 year period. Each successive year, a statistical determination will be completed for the annual data against this baseline to identify potential increases in a monitor’s assessed values. This provides INEOS Styrolution the ability to assess and develop action plans to mitigate, and minimize future benzene concentrations.

PCIS Property Line Monitoring – Maps
PCIS Property Line Monitoring – Monitoring Data

PCIS Annual Reporting
INEOS Styrolution PSCI Annual Report 2019
INEOS Styrolution PCIS Annual Report 2018

Toxics Reduction Act Public Reporting

Styrolution Canada 2012 Toxic Reduction Public Summary Report
Styrolution Canada 2012 Toxic Accounting   
Styrolution Canada 2013 Toxics Reduction Public Summary Report   
Styrolution Canada 2013 Toxic Accounting   
Styrolution Canada 2014 Toxic Accounting   
INEOS Styrolution Canada 2015 Toxic Accounting  

INEOS Styrolution Canada 2016 Toxic Accounting
INEOS Styrolution Canada 2017 Toxic Accounting
INEOS Styrolution Canada 2018 Toxic Accounting



年产60万吨 ABS项目


INEOS Styrolution Advanced Material (Ningbo) Pte.Ltd 60Kt/a ABS project

EIA (environment impact assessment) first turn publicity

一、建设项目基本情况 Project Brief

(1) 项目名称:英力士苯领高新材料(宁波)有限公司年产60万吨 ABS项目

       Project Name: INEOS Styrolution Advanced Material (Ningbo) Pte.Ltd 60Kt/a ABS Project

(2) 工程性质:新建项目

    Type: New build.

(3) 建设单位:英力士苯领高新材料(宁波)有限公司

    Owner: INEOS Styrolution Advanced Material (Ningbo) Pte.Ltd

(4) 建设地点:浙江省宁波市宁波石化经济技术开发区

        Location:  Ningbo Petrochemical Economic and Technological Development Park    
                  (NPETD), Zhenhai District, Ningbo City, Zhejiang Province, China

(5) 建设内容 Construction content:

        本项目总投资约50亿人民币,新增用地266937 m2,项目包括2套30万吨ABS树脂

        The investment of this project is about 5000MRMB. The floor area of the plant has a size of 266937 m2.                        Two sets 300Kt/a ABS resin production unit, after the project completion, there will be 600Kt/a
        ABS resin.


二、建设单位名称和联系方式 Contact information of owner


 Owner: INEOS Styrolution Advanced Material (Ningbo) Pte.Ltd

              联系人Contact :   罗宏    Eric Luo

                联系电话 Telephone: 0574-56570035

                电子邮箱 E-mail: eric.luo@INEOS.com


三、环评单位名称和联系方式 Contact information of the owner of EIA company


  EIA Company: Zhejiang RenXin Huankeyuan Co., Ltd.

联系人 Contact:张文娟  Zhang Wenjuan



四、公众意见表的网络链接 Feedback form

详见本公告附件。See appendix.

五、提交公众意见表的方式和途径 Feedback way


For feedback on the EIA, please send us an email or contact us via telephone.



INEOS Styrolution Advanced Material (Ningbo) Pte.Ltd

2020年 2月18日

February 18, 2020

下载附件-公众调查表 Download appendix (feedback)